Photoelectric Beams series PXB-50-100-200 HF-KH
Photoelectric Beam PXB-100
Photoelectric Beams series PXB-50-100-200 HF-KH

Photoelectric beams PXB-50/100/200HF-KH

PXB-HF-KH series beams are 4-channel quad beams designed specifically for use in beam towers. They include environmental monitoring circuit for maximum stability in severe weather conditions, perfect for long range perimeter intruder detection.

Ref. PXB-50/100/200HF-KH Categories: , Tags: , , , , ,

Description

PXB-HF-KH series beams provide 4 selectable beam channels to prevent crosstalk.

  • PXB-50HF-KH: 4 x synchronised high power beams. Range: up to outdoor 50m / 100m indoor.
  • PXB-100HF-KH: 4 x synchronised high power beams. Range: up to outdoor 100m / 200m indoor.
  • PXB-200HF-KH: 4 x synchronised high power beams. Range: up to outdoor 200m / 400m indoor.

More features:

  • Double coated electronics for demanding environments
  • Double modulation for unsurpassed light immunity
  • Increased beam separation minimises nuisance alarms
  • Vivid internal colour aids beam alignment procedure
  • Lightning and surge protection up to 15kV
  • Environmental monitoring circuit
  • Dynamic auto-gain lock (AGL)
  • 50,000 lux sunlight immunity

Specifications

  • Model: PXB-50HF-KH – PXB-100HF-KH – PXB-200HF-KH
  • Detection system: Near infrared beam interruption system (TX/RX 4 beams simultaneous interruption) .
  • Infrared beam: Double modulation pulsed beam by LED
  • Max. beam range (approx.): 50m/100m/200m outdoor and 100m/200m/400m indoor
  • Response Time: 0,05 sec to 0,7 sec (Variable at pot)
  • Current consumption: 30mA or less / 32mA or less /34mA or less
  • Alarm output: Dry contact relay output form C – Contact action :Interruption time + delay time (2 sec) – Contact capacity : 30 V (AC/DC) 1A (resistive load) Protective resistor
  • Environmental output: Dry contact relay output form C – Contact action: Output when environmental conditions worsen – Contact capacity: 30V (AC/DC) 1A (resistive load) – Protective resistor
  • Alarm LED: Red LED (Receiver) | ON : when an alarm is initiated
  • Attenuation LED: Red LED (Receiver) | ON : when beam reception is attenuated
  • Ambient temperature range: – 35°C to + 66°C
  • Beam Adjustment: Horizontal : ±90° / Vertical : ±20°
  • Functions: Modulated beam frequency selection, Tone indicator, Environmental module ,Beam power selection, Transmitting power adjustment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack, Response time adjustment, Upper/Lower beam switch, Wireless checker
  • Mounting positions: Outdoor / Indoor
  • Wiring: Terminals

Accesories

If you need some information about related accessories, please consult us.

Downloads

Datasheet PXB-50/100/200HF

Manual PXB-50/100/200HF-KH

 

Video

Request Information

More products