Photoelectric Beams
Photoelectric Beams
Photoelectric Beams PXB 50/100/200HF
Photoelectric Beams PXB 50/100/200HF

Photoelectric quad beams PXB-50/100/200HF

4-channel photoelectric quad beam sensors that combine stability and reliability for outdoor and indoor perimeter protection.

When there is no room for compromise, professional installers and specifiers can rely on the enhanced features of the TAKEX flagship PXB range.

Ref. PXB-50/100/200HF Categories: , Tags: , , , ,

Description

Some of the advantages are double modulation, anti-bird spike, drip-proof housing, high-power beams, IP65, a faster and easier alignment process, etc.

  • PXB-50HF: 4 x synchronised high power beams. Beam range: up to outdoor 50m / 100m indoor.
  • PXB-100HF: 4 x synchronised high power beams. Beam range: up to outdoor 100m / 200m indoor.
  • PXB-200HF: 4 x synchronised high power beams. Beam range: up to outdoor 200m / 400m indoor.

Features:

  • 4 x synchronised high power beams
  • 4 selectable beam channels to prevent crosstalk
  • Double modulation for unsurpassed light immunity
  • Increased beam separation minimises nuisance alarms
  • Vivid internal colour aids beam alignment procedure
  • Lightning and surge protection up to 15kV
  • Environmental monitoring circuit
  • Dynamic auto-gain lock (AGL)
  • 50,000 lux sunlight immunity
  • IP65 housing

Specifications

  • Model: PXB-50HF – PXB-100HF – PXB-200HF
  • Detection system: Simultaneous breaking of 4 beams
  • Infrared beam: LED pulsed beam, Double modulation
  • Protection distance: Outdoor 50m (165ft) or less / Indoor 100m or less – Outdoor 100m (330ft) or less / Indoor 200m or less – Outdoor 200m (660ft) or less / Indoor 400m or less
  • Max. beam range (approx.): 500m (1650ft) – 1000m (3300ft)  –  2000m (6600ft)
  • Response Time: 0,05sec. to 0,7sec. (Variable at pot)
  • Supply voltage: 12V to 30VDC (Non-polarity)
  • Current consumption: 30mA or less – 32mA or less – 34mA or less
  • Alarm output: Dry contact relay output form C – Contact action : Interruption time + delay time (2 sec.) – Contact capacity : 30V (AC/DC) 1A (resistive load) – Protective resistor
  • Environmental output: Dry contact relay output form C – Contact Action : Output when environmental conditions worsen – Contact capacity : 30V (AC/DC) 1A (resistive load) – Protective resistor
  • Alarm LED: Red LED (Receiver) | ON : when an alarm is initiated
  • Sensitivity attenuation LED: Red LED (Receiver) | ON : when beam reception is attenuated
  • Functions: Modulated beam frequency selection(4-Channel), Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper / Lower beam switch, Wireless checker
  • Ambient temperature range: – 35° C to + 66° C
  • Beam Adjustment: Horizontal : ±90° / Vertical : ±20°
  • Mounting positions: Indoor / Outdoor
  • Wiring: Terminals
  • Weight: Transmitter : 1400g | Receiver : 1470g
  • Appearance: PC resin (wine red)

Accesories

If you need some information about related accessories, please consult us.

Downloads

Datasheet PXB-50/100/200HF TAKEX

Manual 50/100/200HF TAKEX

 

Video

Request Information

More products