Photoelectric Beams
Photoelectric Beams TXF-125E
Photoelectric Beams TXF-125E
Photoelectric Beams TXF-125E

Battery-powered quad beam TXF-125E

TXF-125E is designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of active infrared beams on rapid deployment or temporary installations.

Ref. TXF-125E Categories: , Tags: , , , ,

Description

The TXF-125E is a battery operated photoelectric quad beam sensor designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations. With 4 selectable frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 25/50/75/100m zones.

Two 3,6V (17Ah) batteries can power each unit for approximately 5 years of service, and ±90° horizontal/±20° vertical adjustable optics cater for the most dynamic of terrains.

  • 4 x synchronised high power beams. Power setting: up to 25m. 4 beam channels
  • 4 x synchronised high power beams. Power setting: up to 50m. 4 beam channels
  • 4 x synchronised high power beams.Power setting: up to 75m. 4 beam channels
  • 4 x synchronised high power beams.Power setting: up to 100m. 4 beam channels

Specifications

  • Model: TXF-125E
  • Detection system: Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)
  • Infrared beam: Single modulation pulsed beam by LED (near infrared beam light-emitting diode)
  • Protection distance: Outdoor 100m (330ft) or less
  • Beam power setting:  100m (330ft) / 75m (245ft) / 50m (165ft)  /  25m (82ft)
  • Response Time: 0,05 sec, 0,10 sec, 0,25 sec, 0,5 sec
  • Battery: SAFT: LS 33600 (or equivalent) 3,6V, 17Ah
  • Battery life: Transmitter = Up to 5 years* (2 batteries) – Receiver = Up to 5 years* (2 batteries) – *Approximate, not guaranteed
  • Beam Adjustment: Horizontal : ±90° / Vertical : ±20°
  • Alarm LED: Red LED (Receiver) | ON : when an alarm is initiated
  • Attenuation LED: Red LED (Receiver) ON: when an alarm is initiated
  • Ambient temperature range: – 10° C to + 50° C (14°F to 122°F)
  • Functions: Modulated beam frequency selection, Tone indicator, Repeat output, Monitor jack, Response time adjustment, Upper/Lower beam switch, Low battery indication, Wireless alignment checker connecting function, Battery saving function, Battery sharing
  • IP rating: IP65
  • Mounting positions: Outdoor / Indoor
  • Weight: Transmitter: 1,5kg (without batteries), Receiver: 1,5kg (without batteries)
  • Appearance: Cover: PC resin (Wine Red), Base: ASA resin (Black)

Accesories

If you need some information about related accessories, please consult us.

Downloads

Datasheet TXF-125E TAKEX

Manual TXF-125E TAKEX

Video

Request Information

More products