Photoelectric Beams
Photoelectric Beams
Photoelectric Beam PXB-100ATC
Photoelectric Beam PXB-100ATC

High security anti-crawl beam PXB-100ATC

Photoelectric anti-crawl quad beam sensors that has been developed for high-risk applications where detection of all intrusion attempts is critical.

Ref. PXB-100ATC Categories: , Tags: , , ,

Description

Sophisticated dual response output systems have been designed to distinguish and allocate specific alarm responses based on the size and speed of target objects moving through the detection area, and a unique synchronized timing system ensures unrivalled detection performance and versatility.

For distances up to 100m (330ft) outdoor.

Features:

  • Independent control of upper and lower beams
  • Choose between synchro-quad and anti-crawl operation
  • Dual outputs for crawl attempt and full beam break
  • Sync wire allows unlimited stacking without crosstalk
  • 4 selectable beam channels
  • Increased beam separation minimises nuisance alarms
  • Vivid internal colour aids beam alignment procedure
  • Lightning and surge protection up to 15kV
  • IP65 housing

Specifications

  • Model: PXB-100ATC
  • Product type: Photoelectric Beam Sensor
  • Detection system: Near infrared beam interruption system (4 beams simultaneous interruption or upper/lower 2 beams interruption)
  • Infrared beam: Double modulation pulsed beam by infrared LED
  • Protection distance: Outdoor 100m (330ft) or less / Indoor 200m (660ft) or less
  • Max. beam range: Outdoor 1000m (3300ft) or less – Indoor 1000m (3300ft) or less
  • Response Time: OR gated : upper and lower 2 beams simultaneous interruption 0.05sec. , upper or lower 2 beams interruption : 0.1/0.2/0.3/0.5 sec. (selectable) – AND gated : upper and lower 2 beams simultaneous interruption 0.05sec.
  • Supply voltage: 12 V a 30 VDC (Non-polarity)
  • Current consumption: Transmitter : 27mA / Receiver : 48mA
  • Alarm output: Dry contact output N/C or N/O selectable – Contact action : Interruption time (min. 2 sec) – * During the synchro signal down, alarm signal output continuously – Capacity : AC/DV30V 1A (resistive load) Protective resistor
  • Environmental output: Dry contact output: N/C or N/O selectable – Action : activated when weather condition worsens – Capacity : AC/DC30V 1A (resistive load) Protective resistor
  • Tamper output: Dry contact output (N.C.) – Action : activated when cover is detached – Capacity : AC/DC30V 0,1A (resistive load) Protective resistor
  • Alarm LED: Red LED (only Receiver) | ON : when an alarm is initiated
  • Attenuation LED: Red LED (only Receiver) ON : when beam is attenuated
  • Functions: Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Programmed AGC, Synchro timing selection, Auto-gain lock function, Monitor jack, Tamper, Response time adjustment, Alarm output selection, Environmental output selection, Upper/Lower beam switch, Wireless Alignmnet Checker connecting function
  • Beam Adjustment: Horizontal : ±90° / Vertical : ±20°
  • Ambient temperature range: -35°C to +66°C (-31°F to +151°F)
  • Mounting positions: Outdoor / Indoor
  • Wiring: Terminals
  • Weight: Transmitter : 1400g (49oz) – Receiver : 1470g (51,5oz)
  • Appearance: PC resin (wine red)
  • Accessory: Pole attachment, Anti-bird spike, Screws, Instruction manual

Accesories

If you need some information about related accessories, please consult us.

Downloads

Datasheet PXB-100ATC TAKEX

Manual PXB-100ATC TAKEX

Video

Request Information

More products