Photoelectric Beams
Photoelectric Beam PXB-100SW

Photoelectric quad beam PXB-100SW

This is an ultra low-current photoelectric quad beam sensor designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.

Ref. PXB-100SW Categories: , Tags: , , , ,

Description

Consists of a photo transmitter that transmits infrared light, and a photo receiver for the transmitted light.

For distances up to 100m (330ft) outdoor.

Features:

  • 4 x synchronised high power beams
  • Low-current consumption for battery or solar operation
  • 4 selectable beam channels to prevent crosstalk
  • Double modulation for unsurpassed light immunity
  • Increased beam separation minimises nuisance alarms
  • Vivid internal colour aids beam alignment procedure
  • Lightning and surge protection up to 15kV
  • Environmental monitoring circuit
  • Dynamic auto-gain lock (AGL)
  • 50,000 lux sunlight immunity
  • IP65 housing
  • Optional BA-6SLA solar panel/battery pack available

Specifications

  • Model: PXB-100SW
  • Product type: Photoelectric Beam Sensor
  • Detection system: Near infrared pulsed beam interruption system (TX-RX 4 beam simultaneous interruption)
  • Infrared beam: Double modulation pulsed beam by LED
  • Protection distance: Outdoor 100m (330ft) or less / Indoor 200m (660ft) or less
  • Max. beam range: Outdoor 1000m (3300ft) or less – Indoor 1000m (3300ft) or less
  • Response Time: 0,05 sec. to 0,7 sec. (Variable at pot)
  • Power supply: 5 to 30VDC (polarity)
  • Current consumption,*1 (armed),*2 (beam alignment): 5 to 8VDC/Transmitter:
    Max: 3,7mA *1 – Max 8,2mA *2 / Receiver: Max:2,3mA *1 – Max 10mA *2. 10 to 30VDC / Transmitter: Max: 5,2mA *1 – Max 9,4mA *2 / Receiver: Max: 3,1mA *1 – Max 1,7mA *2
  • Alarm output: Dry contact relay output form N.O./N.C switchable – Contact action : Interruption time (min. 2 sec) – Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor
  • Environmental output: Dry contact relay output form N.O./N.C. switchable – Action : activated when weather condition worsens – Capacity : 30V (AC/DC) 1A (resistive load) Protective resistor
  • Tamper output: Dry contact relay (N.C.) – Action : activated when cover is detached – Capacity : 30V (AC/DC) 0,1A (resistive load) Protective resistor
  • Alarm LED: Red LED (Receiver) | ON : when an alarm is initiated
  • Attenuation LED: Red LED (Receiver) ON : when beam is attenuated
  • Ambient temperature range: -35°C to +66°C (-31°F to +151°F)
  • Beam Adjustment: Horizontal : ±90° / Vertical : ±20°
  • Functions: Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Alarm output selection, Environmental output selection, Monitor jack, Tamper, Response time adjustment, Upper/Lower beam switch, Wireless Checker
  • Mounting positions: Outdoor / Indoor
  • IP rating: IP65
  • Wiring: Terminals
  • Weight: Transmitter : 1500g (52,5oz) – Receiver : 1550g (54,3oz)
  • Appearance: PC resin (wine red)

Accesories

If you need some information about related accessories, please consult us.

Downloads

Datasheet PXB-100SW TAKEX

Manual PXB-100SW TAKEX

Video

Request Information

More products