PT – Double-sided protection perimeter tower (360°) for photoelectric beams

Double-sided (360º) PT infrared beam tower is an ideal solution to protect perimeters by keeping the same infrared line or height (for long distances) or two different directions. As they can be fixed back to back, continuity is ensured without having to deal with different heights, which is the case with single-sided infrared towers (180°).

Anti-opening tamper included.

Description

PT is a double-sided infrared beam tower model for medium and long range PT sensors and photoelectric detectors. A special feature of this infrared tower model is its main structure composed of an aluminium profile, which allows a transmitter and/or receiver (Tx/Rx) fixation of the infrared photo beams at the same height with the possibility of pointing the IR photo beam in two different directions with 360º protection range.

Given that Bunker manufactures a wide range of perimeter products, such as Garden Guard (MALTA, CAV and CAV-W), for solely residential areas, we refer to the PT infrared tower with the adjective “industrial”, even though in real situations MB IR towers (180º) and PT security towers are installed very often in residential areas and they integrate perfectly their stylish design in the environment, also when using PT-LUX and PT-CCTV accessories (the first one transforms the perimeter security tower into a lamp as low consumption bulbs can be fixed to it. As for PT-CCTV, it allows to integrate inside the infrared tower (AIR) up to two CCTV cameras, which makes the solution very compact and clean. Please see “Accessories” paragraph for more information.

Features:

  • Two black polycarbonate profiles which allow the infrared rays, emitted by the photoelectric beam, to go through.
  • A black anodized aluminium profile which forms part of the IR tower structure.
  • An anti-sabotage tamper to be fixed on the upper side of the IR tower and to consequently avoid a possible manipulation of the perimeter security system by putting out of order a photoelectric sensor or even by cancelling an infrared photo beam.
  • Installation kit: it is composed of stainless screws, used to fix an infrared tower to the floor, to fix infrared photo beams to the main part of the security tower, etc.

In addition, 3m high infrared tower model (PT300), manufactured by Bunker Seguridad, is equipped with 70 cm MB3SB side brackets. These give more stability to the infrared photo beams set inside, but also more rigidity to the electric tower which has an effect on the perimeter security system with less unwanted alarms.

Specifications

Bunker Seguridad as equipment, sensor, detector and perimeter security systems’ manufacturer offers the following references belonging to the double-sided (360º) infrared tower range:

  • PT050 – 50 cm high infrared tower
  • PT100 – 1 m high infrared tower
  • PT150 – 1.5m high IR tower sensor
  • PT200 – 2 m high tower for infrared photo beams
  • PT300 – 3 m high active infrared (AIR) tower

Bunker Seguridad, perimeter security system manufacturer, gives the possibility to prepare upon request other infrared tower configurations and heights

Accesories

MA FAN 12V - MA FAN 24V

Ref. DC 12V

12V 3,5A power supply (it includes a mounting plate to install to the tower).

MA FAN 12V - MA FAN 24V

Ref. DC 24V

24V 1,8A power supply (it includes a mounting plate to install to the tower).

FAN12V

Ref. FAN 12V

12V, 100mA fan.

FAN24V

Ref. FAN 24V

24V, 150mA fan.

MA FAN 12V - MA FAN 24V

Ref. MB3SB

0.70 m high fixing brackets, already included with 3 m high towers.

MA FAN 12V - MA FAN 24V

Ref. PT4R

Guy wires for extreme wind conditions.

MA FAN 12V - MA FAN 24V

Ref. PT-CCTV

CCTV camera installation accessory.

MA FAN 12V - MA FAN 24V

Ref. PTS50

Thermostat for high temperatures. When the temperature rises to 50°C, it activates the fans to make the current flow.

MA FAN 12V - MA FAN 24V

Ref. PT CLIP

Cable organizer (10 units/pack)

MA FAN 12V - MA FAN 24V

Ref. PTFA

Battery bracket.

MA FAN 12V - MA FAN 24V

Ref. PTFB

Floor bracket for a concrete base on uneven and difficult grounds.

MA FAN 12V - MA FAN 24V

Ref. PT-LUX

Lamp installation accessory.

MA FAN 12V - MA FAN 24V

Ref. PTPS

Anti-climb tamper for PT towers.

MA FAN 12V - MA FAN 24V

Ref. PTWB

Bracket to fix PT towers to the wall. It does not include the fixing screws.

PTSSL

Ref. PTSSL

Optex mounting plates (2 units) for wireless photobeams with 2 beams and SL series with 4 beams.

PTH24V

Ref. PTH24V

12 or 24V, 250/500mA heater.

PTH24V

Ref. PTS

Bimetal thermostat. When the temperature falls below 4°C, it makes the current flow to the heaters and fans.

PTH24V

Ref. BEAG

Optex mounting plates (2 units) for cabled photobeams with 2 beams.

Takex mounting plates (2 units) for TAKEX photobeams, KH model.

Ref. TAKH

Takex mounting plates (2 units) for TAKEX photobeams, KH model.

Takex mounting plates (2 units) for TAKEX photobeams, KH model.

Ref. PTFA

 Battery bracket.

Power supply unit for low-battery devices and signal transmitters

Ref. BATTERY PACK

Power supply unit for low-battery devices and signal transmitters. Bracket required, not included. Please check accessories for tower, wall or pole mounting.

Downloads

Datasheet of Perimeter Towers – Industrial Use

Commercial Datasheet

Video

Request Information