With 4-channel frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 25/50/75/100m zones. The adjustable detection distance allows a single beam set to be re-deployed in a variety of different installations throughout its operational life

Featuring ±90° horizontal and ±20° vertical optical head adjustment, the TXF-125DM can cater for even the most dynamic of terrains, ensuring high performance intrusion detection in almost any environment.

Features:

• Outdoor or indoor detection with IP65 housing.
• Double modulation.
• 4 selectable operation ranges 25/50/75/100m.
• 4 selectable beam channels to prevent crosstalk.
• Up to 3 year battery life using 6 × LS 33600 (3.6V 17Ah) batteries (TX : 4pcs, RX : 2PCS). Batteries are not included.
  
• Easy ±90° Horizontal / ±20°vertical adjustment.
• Anti-bird spikes to prevent our feathered friends from alighting on the units.
  
• Lightning surge protection.

The post Battery operated wireless ready quad beam TXF-125DM appeared first on Bunker Seguridad Electrónica S.L..

Two 3,6V (17Ah) batteries can power each unit for approximately 5 years of service, and ±90° horizontal/±20° vertical adjustable optics cater for the most dynamic of terrains.

Features:

• 4 x synchronised high power beams
• 4 selectable operation ranges 25/50/75/100m
• 4 selectable beam channels to prevent crosstalk
• up to 5 year battery life using 2 x LS 33600 (3,6V 17Ah) batteries per unit
• increased beam separation minimises nuisance alarms
• vivid internal colour aids beam alignment procedure
• ±90° horizontal ±20° vertical adjustable sensor heads
• environmental monitoring circuit

The post Battery powered quad beam TXF-125-KH appeared first on Bunker Seguridad Electrónica S.L..

The unique combination of triple mirrors and three twin pyros enable 4 selectable operation modes including Low Position, High Position, Pet Mode, and High Density; for distances up to 15m from a mounting height of 2 to 6m, throughout a full 80 degrees.

Features:

• 4 Operation modes; Low Position, High Position, Pet Mode, and High Density
• Up to 15m x 80 degree coverage
• 2m to 6m Installation height (depending on operation mode)
• High performance triple mirror optical system
• Precise detection area adjustment function
• Anti-masking function (PIR-T15AM)
• Lightning surge protection
• Suitable for indoor and outdoor use (IP55)

The post External PIR-T15WE /T15AM appeared first on Bunker Seguridad Electrónica S.L..

Wall-mounting. For ground mounting please see prewired perimeter tower model S30xxx.

Features:

Each reference includes a central body in aluminium, a polycarbonate profile, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a motherboard that manages the system.

Everything is prewired and mounted together with the IR beams – (*) chosen by the customer – and their mounting back plates.

(*)  Compatible with different models of photoelectric beams (TAKEX, OPTEX, ATSUMI and others) (not included in price). easyPack can also be supplied without photoelectric beams.

Ready for wall-mounting.

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, etc.). For more information see “Accessories” paragraph.

Most common models for 3m height:

• W302RR – 3m, 180° wall-mounting tower ready for 2 Rx.
• W302TT – 3m, 180° wall-mounting tower ready for 2 Tx.
• W303RR – 3m, 180° wall-mounting tower ready for 3 Rx.
• W303TT – 3m, 180° wall-mounting tower ready for 3 Tx.
• W304RR – 3m, 180° wall-mounting tower ready for 4 Rx.
• W304TT – 3m, 180° wall-mounting tower ready for 4 Tx.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 180°, 3m, wall installation appeared first on Bunker Seguridad Electrónica S.L..

Wall-mounting. For ground mounting please see prewired perimeter tower model S20xxx.

Features:

Each reference includes a central body in aluminium, a polycarbonate profile, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a motherboard that manages the system.

Everything is prewired and mounted together with the IR beams – (*) chosen by the customer – and their mounting back plates.

(*)  Compatible with different models of photoelectric beams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photoelectric beams.

This perimeter tower is ready for wall-mounting.

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, etc.). For more information see “Accessories” paragraph.

Most common models for 2m height and 180º:

• W202RR – 2m, 180° wall-mounting tower ready for 2 Rx.
• W202TT – 2m, 180° wall-mounting tower ready for 2 Tx.
• W203RR – 2m, 180° wall-mounting tower ready for 3 Rx.
• W203TT – 2m, 180° wall-mounting tower ready for 3 Tx.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 180°, 2m, wall installation appeared first on Bunker Seguridad Electrónica S.L..

Features:

Each reference includes a central body in aluminium, a polycarbonate profile, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a motherboard that manages the system.

Everything is prewired and mounted together with the IR beams (*), chosen by the customer and their mounting back plates.

(*) Compatible with different models of photobeams (TAKEX, OPTEX, ATSUMI and others). These are not included in the price. easyPack can also be supplied without photobeams.

Besides, it includes 70cm side brackets (MB3SB).

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, floor bracket to be used with concrete, etc.). For more information see “Accessories” paragraph.

Most common models for 3m height and 180º:

• S302RR – 3m, 180° tower ready for 2 Rx.
• S302TT – 3m, 180° tower ready for 2 Tx.
• S303RR – 3m, 180° tower ready for 3 Rx.
• S303TT – 3m, 180° tower ready for 3 Tx.
• S304RR – 3m, 180° tower ready for 4 Rx.
• S304TT – 3m, 180° tower ready for 4 Tx.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 180°, 3m, ground installation appeared first on Bunker Seguridad Electrónica S.L..

Ground mounting. For wall-mounting please see prewired perimeter tower model W20xxx.

Features:

Each reference includes a central body in aluminium, a polycarbonate profile, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a motherboard that manages the system.

Everything is prewired and mounted together with the IR beams (*), chosen by the customer and their mounting back plates.

(*) Compatible with different models of photoelectric beams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photoelectric beams.

It also includes side brackets.

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, 0,70m steel side brackets, floor bracket to be used in combination with concrete, etc.). For more information see “Accessories” section.

Most common models for 2m height and 180º:

• S202RR – 2m, 180° tower ready for 2 Rx.
• S202TT – 2m, 180° tower ready for 2 Tx.
• S203RR – 2m, 180° tower ready for 3 Rx.
• S203TT – 2m, 180° tower ready for 3 Tx.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 180°, 2m, ground installation appeared first on Bunker Seguridad Electrónica S.L..

Ground mounting. For wall-mounting the accessory PTWB is required.

Features:

Each reference includes a central body in aluminium, two polycarbonate profiles, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), thermostat and the motherboard that manages all the system.

Everything is prewired and mounted together with the IR beams (*) – chosen by the customer – and their mounting back plates.

(*) Compatible with different models of photobeams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photobeams.

Besides, it includes 70cm side brackets (MB3SB).

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as the other usual Bunker’s beam towers’ accessories (anti-climb top tamper, concrete floor bracket, etc.). For more information see “Accessories” paragraph.

Most common models for 3m height:

• D304RR – 3m, 360° tower ready for 4 Rx on each side.
• D304TT – 3m, 360° tower ready for 4 Tx on each side.
• D304TR – 3m, 360° tower ready for 2 Tx on one side and 2 Rx on the other side.
• D306RR – 3m, 360° tower ready for 6 Rx on each side.
• D306TT – 3m, 360° tower ready for 6Tx on each side.
• D306TR – 3m, 360° tower ready for 2 Tx on one side and 3 Rx on the other side.
• D308RR – 3m, 360° tower ready for 8 Rx on each side.
• D308TT – 3m, 360° tower ready for 8 Tx on each side.
• D308TR – 3m, 360° tower ready for 4 Tx on one side and 4 Rx on the other side.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 360°, 3m, ground installation appeared first on Bunker Seguridad Electrónica S.L..

CAV-W is a perimeter lamp tower mainly used in residential areas, a garden lamp style tower, where dual-beam IR photo detectors can be easily hidden. CAV Garden Guard perimeter lamp tower has a discreet design which perfectly fits into any yard or garden without losing its aesthetic value, while at the same time it provides perimeter security and light to the area. CAV-W is an excellent alternative in order to protect immediate perimeter of a building with a simple wall installation. CAV-W prevents gutters, drains and other obstacles, thus allowing protection of all the entrances in the façade. Two CAV-W units are supplied per each CAV-W reference.

The entire Garden Guard infrared perimeter tower range is perfectly coordinated both aesthetically and functionally, that is to say, CAV-W security tower can be used with CAV-W, or even with MALTA, CAV infrared towers and even with the industrial range if required so (PT, MB and MB-W infrared towers).

Features:

CAV-W is an infrared tower, belonging to the Garden Guard family, destined to be fixed onto the ground (see CAV and MALTA model for floor installation).

CAV-W Garden Guard infrared tower for photoelectric sensors with two beams – dimensions:

• IR tower’s external pole: 10 cm (3.94”).
• IR tower’s upper part: 25 cm (9.84”).
• Height (IR beam’s lamp included – 25cm): 61.4 cm (24.17″).
• IR tower’s base diameter: 27.4 cm (10.8″).

Material composing CAV-W Garden Guard photoelectric tower:

• Aluminum profile which acts as the central part of the CAV-W infrared tower.
• Black polycarbonate tube with UV treatment. It has two main functions: on one hand, it covers the structure by hiding at the same time photoelectric sensors’ localization, orientation and height and on the other hand, it protects these sensors from vandal acts.
• Reinforced ABS base fixing support where the security tower’s aluminium profile and polycarbonate profile are fixed.
• CAV upper body (grille type) made of black polycarbonate.
• Ceramic socket for E27 bulb fixing on the top of the infrared garden lamp.

Each CAV-W Garden Guard infrared tower’s approximate weight: 4 kg. CAV-W reference includes two CAV-W units.

The post CAVW – Wall-mounting perimeter lamp tower (180°) appeared first on Bunker Seguridad Electrónica S.L..

CAV/2 is an infrared lamp tower (180°) mainly used in residential areas, a garden lamp style tower, where dual-beam IR photo detectors can be easily hidden. CAV Garden Guard perimeter lamp tower (180°) has a discreet design which perfectly fits into any yard or garden without losing its aesthetic value, while at the same time it provides perimeter security and light to the area.

The entire Garden Guard infrared perimeter tower range is perfectly coordinated both aesthetically and functionally, that is to say, CAV security tower can be used with CAV, or even with MALTA infrared towers and even with the industrial range if required so (PT, MB and MB-W infrared towers).

Features:

CAV is an infrared tower, belonging to the Garden Guard family, destined to be fixed onto the ground (see CAVW model for wall installation).

CAV Garden Guard infrared tower for photoelectric sensors with two beams – dimensions:

• IR tower’s external pole: 10 cm (3.94”).
• IR tower’s upper part: 25 cm (9.84”).
• Height (IR beam’s lamp included – 25cm): 100 cm (39.4″).
• IR tower’s base diameter: 27 cm (10.63″).

Material composing CAV Garden Guard photoelectric tower:

• Aluminum profile which acts as the central part of the CAV infrared tower.
• Black polycarbonate tube with UV treatment. It has two main functions: on one hand, it covers the structure by hiding at the same time photoelectric sensors’ localization, orientation and height and on the other hand, it protects these sensors from vandal acts.
• Reinforced ABS base fixing support where the security tower’s aluminium profile and polycarbonate profile are fixed.
• CAV upper body (grille type) made of black polycarbonate.
• Ceramic socket for E27 bulb fixing on the top of the infrared garden lamp.

CAV/2 Garden Guard’s approximate weight (two towers): 9 kg.

The post CAV/2 – 2 units of garden lamp towers for infrared photobeams appeared first on Bunker Seguridad Electrónica S.L..