Ground mounting. For wall-mounting the accessory PTWB is required.

Features:

Each reference includes a central body in aluminium, two polycarbonate profiles, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), thermostat and the motherboard that manages all the system.

Everything is prewired and mounted together with the IR beams (*) – chosen by the customer – and their mounting back plates.

(*) Compatible with different models of photobeams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photobeams.

Besides, it includes 70cm side brackets (MB3SB).

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as the other usual Bunker’s beam towers’ accessories (anti-climb top tamper, concrete floor bracket, etc.). For more information see “Accessories” paragraph.

Most common models for 3m height:

• D304RR – 3m, 360° tower ready for 4 Rx on each side.
• D304TT – 3m, 360° tower ready for 4 Tx on each side.
• D304TR – 3m, 360° tower ready for 2 Tx on one side and 2 Rx on the other side.
• D306RR – 3m, 360° tower ready for 6 Rx on each side.
• D306TT – 3m, 360° tower ready for 6Tx on each side.
• D306TR – 3m, 360° tower ready for 2 Tx on one side and 3 Rx on the other side.
• D308RR – 3m, 360° tower ready for 8 Rx on each side.
• D308TT – 3m, 360° tower ready for 8 Tx on each side.
• D308TR – 3m, 360° tower ready for 4 Tx on one side and 4 Rx on the other side.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 360°, 3m, ground installation appeared first on Bunker Seguridad Electrónica S.L..

Given that Bunker manufactures a wide range of perimeter products, such as Garden Guard (MALTA, CAV and CAV-W), for solely residential areas, we refer to the PT infrared tower with the adjective “industrial”, even though in real situations MB IR towers (180º) and PT security towers are installed very often in residential areas and they integrate perfectly their stylish design in the environment, also when using PT-LUX and PT-CCTV accessories (the first one transforms the perimeter security tower into a lamp as low consumption bulbs can be fixed to it. As for PT-CCTV, it allows to integrate inside the infrared tower (AIR) up to two CCTV cameras, which makes the solution very compact and clean. Please see “Accessories” paragraph for more information.

Features:

• Two black polycarbonate profiles which allow the infrared rays, emitted by the photoelectric beam, to go through.
• A black anodized aluminium profile which forms part of the IR tower structure.
• An anti-sabotage tamper to be fixed on the upper side of the IR tower and to consequently avoid a possible manipulation of the perimeter security system by putting out of order a photoelectric sensor or even by cancelling an infrared photo beam.
• Installation kit: it is composed of stainless screws, used to fix an infrared tower to the floor, to fix infrared photo beams to the main part of the security tower, etc.

In addition, 3m high infrared tower model (PT300), manufactured by Bunker Seguridad, is equipped with 70 cm MB3SB side brackets. These give more stability to the infrared photo beams set inside, but also more rigidity to the electric tower which has an effect on the perimeter security system with less unwanted alarms.

The post PT – Double-sided protection perimeter tower (360°) for photoelectric beams appeared first on Bunker Seguridad Electrónica S.L..