4 ports Archives - Bunker Seguridad Electrónica S.L. https://bunkerseguridad.es/en/tag/4-ports/ Manufacturing and distribution of perimeter detection systems in Europe. Tue, 29 Dec 2020 09:07:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://bunkerseguridad.es/en/wp-content/uploads/2021/02/cropped-Bunker-seguridad--32x32.png 4 ports Archives - Bunker Seguridad Electrónica S.L. https://bunkerseguridad.es/en/tag/4-ports/ 32 32 eCopper™ – EERF4-DN1-R-WN-B https://bunkerseguridad.es/en/security-product/ecopper-eerf4-dn1-r-wn-b/ Mon, 28 Dec 2020 12:32:58 +0000 https://bunkerseguridad.es/en/?post_type=product&p=6339 eCopper™ - The KBC EERF4-DN1-R-WN-B series is an Ethernet over UTP (EoU) receiver with 4 UTP ports supplying Power over Wire (PoW), 1*10/100/1000M Ethernet port and 1*1000Base-FX port. This switch provides connectivity up to 4* PoW/PoE (EERF1-LS1-T-MN-B) transmitters.

The post eCopper™ – EERF4-DN1-R-WN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC eCopper™ EERF4-DN1-R-WN-B is a fully ruggedized Ethernet over coax transmitter. This transmitter provides connectivity for four 10/100Mbps IEEE standard twisted pair copper ports over a 75ohm coaxial cable. Power is supplied from the headend receiver EECF1-LN1–R through the coaxial cable by Power over Coax (PoC) technology. This transmitter provides PoE/PoE+ support. Varying data rates are supported depending on cable distance and quality. The plug-and-play design ensures ease of installation with n4 UTP ports with or without PoW.

Features:

  • 4 UTP ports with or without PoW
  • 1 *10/100/1000M Ethernet port,1 *1000Base-FX SFP port
  • PoW management
  • Full switching capability
  • Connect up to 4 transmitters, EERF1-LS1-T-MN-B or EERN1-LN1-T-MN-B or mixed.
  • UTP data rate >40Mbps (300m)
  • Based on cable quality, cable pairs used (1,2 or 4 pairs) and voltage applied to cable (48~57VDC) from headend , PoE and PoE+ are supported by PoW up to 400m.
  • Over current and short circuit protection
  • Unique PoW transmission protection design so that no power is output when transmitter end is not connected

The post eCopper™ – EERF4-DN1-R-WN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> eCopper™ – EECF4-DN1-R-WN-B https://bunkerseguridad.es/en/security-product/ecopper-eecf4-dn1-r-wn-b/ Mon, 28 Dec 2020 09:44:53 +0000 https://bunkerseguridad.es/en/?post_type=product&p=6315 eCopper™ - The KBC EECF4-DN1-R-WN-B iThe KBC EECF4-DN1-R is an Ethernet over Coax (EoC) receiver with 4 coax ports with Power Over Coax (PoC) up to 700m, EoC/PoE+ up to 300m. (1) 10/100/1000Mbps Ethernet port, (1) Gigabit SFP port. Input 48~57VDC. Desktop/wallmount. Requires power supply sold separately.

The post eCopper™ – EECF4-DN1-R-WN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC eCopper™ EECF4-DN1-R-WN-B line of products offer a cost-effective way to connect the latest IP cameras using existing coax or copper (UTP) wiring to a remote monitoring station. In addition to saving costs and time from cabling infrastructure upgrades to CAT5/5e/6, eCopper™powers both its transmitter and remote cameras, eliminating the need for any additional power source at the camera site. eCopper™also extends the IP camera cable run distance from 100 to 300 meters, making it ideal for upgrading analog to IP cameras and other systems in large corporate buildings, retail, casinos, banks, prisons, stadiums and other applications.

The KBC EECF4-DN1-R is an Ethernet over Coax (EoC) receiver with 4 coax ports with Power Over Coax (PoC) and 1*10/100/1000M Ethernet ports,1*1000Base-FX SFP port. This receiver provides connectivity up to 4 units PoC/PoE version EECF1-LS1-T-MN-B transmitter. Power is supplied to the transmitter through the coaxial cable. Varying data rates are supported depending on cable distance and quality. This product also provides PoC management which allows the operator to remotely switch power on or off to any of the coax channels. Plug-and-play design ensures ease of installation with no electrical adjustment needed.LED indicators are provided to show the operational status of the unit clearly. This receiver is available in DIN rail mount and wall mount.

Features:

  • 4 coax ports with PoC
  • 1 *10/100/1000M Ethernet ports,1*1000Base-FX SFP port
  • PoC management
  • Connect up to 4 units EECF1-LS1-T-IN-B or EECF1-LS1-T-MN-B or any combination
  • Coax data rate >50Mbps (300m)
  • PoE+ is supported up to 300m based on coax quality and applied voltage to coax (48~57VDC)
  • Over current and short circuit protection
  • Unique PoC transmission protection design so that no power is output when transmitter end is not connected

The post eCopper™ – EECF4-DN1-R-WN-B appeared first on Bunker Seguridad Electrónica S.L..

]]> Industrial switch, ESMGS8-P4-B Series https://bunkerseguridad.es/en/security-product/industrial-switch-esmgs8-p4-b/ Fri, 27 Nov 2020 11:50:38 +0000 https://bunkerseguridad.es/en/?post_type=product&p=4987 Industrial Ethernet switch, Layer 2 managed,(8) 10/100/1000Mbps IEEE802.3at PoE+ copper ports, 240W PoE budget, (4) Gigabit SFP ports. 48~57VDC input. Requires power supply sold separately. DIN rail/desktop/wall-mount

The post Industrial switch, ESMGS8-P4-B Series appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC ESMGS8-P4-B series is a high performance 12 port, industrial, managed gigabit switch with eight 10/100/1000M PoE ports and four gigabit SFP ports. The eight PoE ports support IEEE802.3af/at standard. The switch supports Ethernet Ring Protection Switching (ERPS) as well as STP/RSTP/MSTP. It also supports Web-based network management, VLAN, QoS, SNMP, IGMP snooping and other network functions. LED indicators provide the connection status when using SFP option. Rugged design with IP40 enclosure and industrial level 3 protection makes it suitable for a lot of application such as Intelligent Transportation System, IP surveillance applications and industrial networks. The product is available for DIN or wall-mount configurations.

Features:

  • 8* 10/100/1000Base-T Ethernet ports (PoE)
  • 4* 1000BASE-X SFP ports
  • EPRS (typical recovery time < 30ms over 250 units of connection)
  • Different redundancy protocols and standards STP / RSTP / MSTP
  • SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN network management
  • WEB, Telnet, SSH, Console (CLI)
  • Open and close port, binding MAC and port
  • 802.1x network access control
  • 802.1Q protocol, Isolate network flow
  • Radius Centralized password management
  • IGMP Snooping multicast function
  • IEEE802.3af/at standard.
  • Overload current protection and reverse polarity protection
  • LED displays connection status when using SFP
  • IP40 enclosure protection
  • Unique DIN mount design makes mount and removal easy

The post Industrial switch, ESMGS8-P4-B Series appeared first on Bunker Seguridad Electrónica S.L..

]]> Industrial switch, ESMGS8-C2-B https://bunkerseguridad.es/en/security-product/industrial-switch-esmgs8-c2-b/ Fri, 27 Nov 2020 11:33:55 +0000 https://bunkerseguridad.es/en/?post_type=product&p=4979 Industrial Ethernet switch, Layer 2 managed,(8) 10/100/1000Mbps IEEE802.3at PoE+ copper ports, (2) Gigabit combo ports. DIN rail/wall mount. 48~57VDC input. Requires power supply sold separately.

The post Industrial switch, ESMGS8-C2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC ESMGS8-C2-B series is a high performance 10 port, industrial, managed gigabit Ethernet switch with eight 10/100/1000M PoE ports and two gigabit combo ports. The eight PoE ports support IEEE802.3af/at standard. The switch supports Ethernet Ring Protection Switching (ERPS) as well as STP/RSTP/MSTP. It also supports Web-based network management, VLAN, QoS, SNMP, IGMP snooping and other network functions. LED indicators provide the connection status when using SFP option. Rugged design with IP40 enclosure and industrial level 3 ESD protection makes it suitable for many applications such as Intelligent Transportation Systems, IP surveillance and industrial networks. The product is available in either DIN rail or wall-mount configurations.

Features:

  • 8* 10/100/1000Base-T Ethernet ports (PoE)
  • 2* Gigabit Comb ports
  • EPRS (typical recovery time < 30ms over 250 units of connection)
  • Different redundancy protocols and standards STP / RSTP / MSTP
  • SNMP v1/v2c/v3 & RMON & Port base/802.1Q VLAN network management
  • IGMP Snooping multicast function
  • WEB, Telnet, SSH, Console (CLI)
  • Open and close port, binding MAC and port
  • 802.1x network access control
  • 802.1Q protocol, Isolate network flow
  • Radius Centralized password management
  • IEEE802.3af/at standard
  • Overload current protection and reverse polarity protection
  • LED display shows transmitting and receiving power of the optics
  • IP40 enclosure protection
  • Unique DIN mount design makes mount and removal easy

The post Industrial switch, ESMGS8-C2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> Industrial switch, ESMGS4-P2-B https://bunkerseguridad.es/en/security-product/industrial-switch-esmgs4-p2-b/ Fri, 27 Nov 2020 11:04:06 +0000 https://bunkerseguridad.es/en/?post_type=product&p=4976 Industrial Ethernet switch, Layer 2 managed,(4) 10/100/1000Mbps IEEE802.3at PoE+ copper ports, (2) Gigabit SFP ports. DIN rail/wall mount. 48~57VDC input. Requires power supply sold separately

The post Industrial switch, ESMGS4-P2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC ESMGS4-P2-B series is a high performance six port, industrial managed gigabit Ethernet switch with four 10/100/1000M PoE ports and two gigabit SFP ports. The four PoE ports support IEEE802.3af/at standard. The switch supports Ethernet Ring Protection Switching (ERPS) as well as STP/RSTP/MSTP. It also supports Web-based network management, VLAN, QoS, SNMP, IGMP snooping and other network functions. Rugged design with IP40 enclosure and industrial level 3 ESD protection makes it suitable for applications such as Intelligent Transportation Systems, IP surveillance and industrial networks. The series is available in either DIN rail or wall-mount configurations.

Features:

  • 4* 10/100/1000Base-T Ethernet ports (PoE)
  • 2* 1000BASE-X SFP ports
  • EPRS (typical recovery time < 30ms over 250 units of connection)
  • STP / RSTP / MSTP redundancy protocols and standards
  • SNMP v1/v2c/v3 & RMON & Port base/802.1Q VLAN network management
  • IGMP Snooping multicast function
  • WEB, Telnet, SSH, Console (CLI)
  • Open and close port, binding MAC and port
  • 802.1x network access control
  • 802.1Q protocol, Isolate network flow
  • Radius Centralized password management
  • IEEE802.3af/at standard
  • Overload current protection and reverse polarity protection
  • LED display shows transmitting and receiving power of the optics
  • IP40 enclosure protection
  • Unique DIN mount design makes mount and removal easy

The post Industrial switch, ESMGS4-P2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> Industrial switch, ESMPN8-N2-B https://bunkerseguridad.es/en/security-product/industrial-switch-esmpn8-n2-b/ Fri, 27 Nov 2020 10:35:12 +0000 https://bunkerseguridad.es/en/?post_type=product&p=4968 Industrial Ethernet switch, Layer 2 managed,(8) Gigabit SFP ports, (2) 10-Gigabit SFP ports. DIN rail/wall mount. Redundant 12~24VDC input. Requires power supply sold separately

The post Industrial switch, ESMPN8-N2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC ESMPN8-N2-B Series is a high performance 10 port, industrial managed full SFP switch. It has eight 1Gbps SFP ports and two 10Gbps SFP ports. The 8*1Gbps SFP ports are compatible with KBC media converters, unmanaged & managed industrial switches with SFP ports, and other similar switches in the market. The switch supports Ethernet Ring Protection Switching (ERPS) as well as STP/RSTP/MSTP. It also supports Web-based network management, VLAN, QoS, SNMP, IGMP snooping and other network functions. LED indicators provide the connection status when using SFP option. Rugged design with IP40 enclosure and industrial level 3 ESD protection make this switch suitable for applications such as Intelligent Transportation Systems, IP surveillance applications and industrial networks. The product is available in either DIN rail or wall-mount configurations.

Features:

  • 8 *1000Base-FX SFP, 2 10GBase-FX SFP+
  • EPRS (typical recovery time < 30ms over 250 units of connection)
  • STP / RSTP and MSTP redundancy protocols and standards
  • SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN network management
  • Management via WEB, Telnet, SSH and Console(CLI)
  • Open and close port, binding MAC and port
  • 802.1x network access control
  • 802.1Q protocol, Isolate network flow
  • Radius Centralized password management
  • IGMP Snooping multicast function
  • Overload current protection and reverse polarity protection
  • LED displays connection status when using SFP
  • IP40 enclosure protection
  • Unique DIN mount design makes mount and removal easy

The post Industrial switch, ESMPN8-N2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> Industrial switch, ESMGN8-P4-B https://bunkerseguridad.es/en/security-product/industrial-switch-esmgn8-p4-b/ Fri, 27 Nov 2020 10:18:55 +0000 https://bunkerseguridad.es/en/?post_type=product&p=4961 Industrial Ethernet switch, Layer 2 managed,(8) 10/100/1000Mbps copper ports, (4) Gigabit SFP ports, IP40 industrial level 3 ESD protection. DIN rail/wall mount. 48~57VDC input. Requires power supply sold separately.

The post Industrial switch, ESMGN8-P4-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC ESMGN8-P4-B series is a high performance 12 port, industrial, managed gigabit switch with eight 10/100/1000M ports and four gigabit SFP ports. The switch supports Ethernet Ring Protection Switching (ERPS) as well as STP/RSTP/MSTP. It also supports Webbased network management, VLAN, QoS, SNMP, IGMP snooping and other network functions.
LED indicators provide the connection status when using SFP option. Rugged design with IP40 enclosure and industrial level 3 protection makes it suitable for a lot of application such as Intelligent Transportation System, IP surveillance applications and industrial networks. The product is available for DIN or wall-mount configurations.

Features:

  • 8* 10/100/1000Base-T Ethernet ports
  • 4* 1000BASE-X SFP ports
  • EPRS (typical recovery time < 30ms over 250 units of connection)
  • Different redundancy protocols and standards STP / RSTP / MSTP
  • SNMP v1/v2c/v3 & RMON & Port base/802.1Q VLAN network management
  • WEB, Telnet, SSH, Console (CLI)
  • Open and close port, binding MAC and port
  • 802.1x network access control
  • 802.1Q protocol, Isolate network flow
  • Radius Centralized password management
  • IGMP Snooping multicast function
  • Overload current protection and reverse polarity protection
  • LED displays connection status when using SFP
  • IP40 enclosure protection
  • Unique DIN mount design makes mount and removal easy

The post Industrial switch, ESMGN8-P4-B appeared first on Bunker Seguridad Electrónica S.L..

]]> Industrial switch, ESMGN8-C2-B https://bunkerseguridad.es/en/security-product/industrial-switch-esmgn8-c2-b/ Fri, 27 Nov 2020 10:00:38 +0000 https://bunkerseguridad.es/en/?post_type=product&p=4955 Industrial Ethernet switch, Layer 2 managed,(8) 10/100/1000Mbps copper ports, (2) Gigabit combo ports, IP40 industrial level 3 ESD protection. DIN rail/wall mount. 48~57VDC input. Requires power supply sold separately.

The post Industrial switch, ESMGN8-C2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC ESMGN8-C2-B series is a high performance 10 port, industrial, managed gigabit Ethernet switch with eight 10/100/1000M ports and two gigabit combo ports. The switch supports Ethernet Ring Protection Switching (ERPS) as well as STP/RSTP/MSTP. It also supports Web-based network management, VLAN, QoS, SNMP, IGMP snooping and other network functions. LED indicators provide the connection status when using SFP option. Rugged design with IP40 enclosure and industrial level 3 ESD protection makes it suitable for many applications such as Intelligent Transportation Systems, IP surveillance and industrial networks. The product is available in either DIN rail or wall-mount configurations.

Features:

  • 8* 10/100/1000Base-T Ethernet ports
  • 2* Gigabit Comb ports
  • EPRS (typical recovery time < 30ms over 250 units of connection)
  • Different redundancy protocols and standards STP / RSTP / MSTP
  • SNMP v1/v2c/v3 & RMON & Port base/802.1Q VLAN network management
  • IGMP Snooping multicast function
  • WEB, Telnet, SSH, Console (CLI)
  • Open and close port, binding MAC and port
  • 802.1x network access control
  • 802.1Q protocol, Isolate network flow
  • Radius Centralized password management
  • Overload current protection and reverse polarity protection
  • LED display shows transmitting and receiving power of the optics
  • IP40 enclosure protection
  • Unique DIN mount design makes mount and removal easy

The post Industrial switch, ESMGN8-C2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> Industrial switch, ESMGN4-P2-B https://bunkerseguridad.es/en/security-product/industrial-ethernet-switch-esmgn4-p2-b/ Fri, 27 Nov 2020 09:06:00 +0000 https://bunkerseguridad.es/en/?post_type=product&p=4915 Industrial Ethernet switch, Layer 2 managed,(8) (4) 10/100/1000Mbps copper ports, (2) Gigabit SFP ports, IP40 industrial level 3 ESD protection. DIN rail/wall mount. 48~57VDC input. Requires power supply sold separately

The post Industrial switch, ESMGN4-P2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC ESMGN4-P2-B series is a high performance six port, industrial managed gigabit Ethernet switch with four 10/100/1000M ports and two gigabit SFP ports. The switch supports Ethernet Ring Protection Switching (ERPS) as well as STP/RSTP/MSTP. It also supports Webbased network management, VLAN, QoS, SNMP, IGMP snooping and other network functions.
Rugged design with IP40 enclosure and industrial level 3 ESD protection makes it suitable for applications such as Intelligent Transportation Systems, IP surveillance and industrial networks. The series is available in either DIN rail or wall-mount configurations.

Features:

  • 4* 10/100/1000Base-T Ethernet ports
  • 2* 1000BASE-X SFP ports
  • EPRS (typical recovery time < 30ms over 250 units of connection)
  • STP / RSTP / MSTP redundancy protocols and standards
  • SNMP v1/v2c/v3 & RMON & Port base/802.1Q VLAN network management
  • IGMP Snooping multicast function
  • WEB, Telnet, SSH, Console (CLI)
  • Open and close port, binding MAC and port
  • 802.1x network access control
  • 802.1Q protocol, Isolate network flow
  • Radius Centralized password management
  • Overload current protection and reverse polarity protection
  • LED display shows transmitting and receiving power of the optics
  • IP40 enclosure protection
  • Unique DIN mount design makes mount and removal easy

The post Industrial switch, ESMGN4-P2-B appeared first on Bunker Seguridad Electrónica S.L..

]]> Industrial switch, ESUGS8-P2-L-B https://bunkerseguridad.es/en/security-product/industrial-switch-esugs8-p2-l-b/ Fri, 27 Nov 2020 08:07:26 +0000 https://bunkerseguridad.es/en/?post_type=product&p=4887 Industrial Ethernet switch, unmanaged, (8) 10/100/1000M IEEE802.3af/at PoE++ copper ports (total POE budget 160W), (2) Gigabit SFP ports, IP40 industrial level 3 ESD protection. DIN rail mount. Input 24VDC. Requires power supply sold separately.

The post Industrial switch, ESUGS8-P2-L-B appeared first on Bunker Seguridad Electrónica S.L..

]]> The KBC ESUGS8-P2-L-B Series is a high performance, unmanaged industrial gigabit Ethernet switch with 8* 10/100/1000M auto sensing copper port, 2 gigabit SFP ports. The switch is powered by 9 ~36 VDC making it the perfect choice for applications where +12VDC or 24VDC power is available. Eight copper ports support PoE/PoE+ which means each port offers a maximum of 30w power. The switch is rugged in design with IP40 and industrial level 3 ESD protection. Unique mount design makes DIN mounting and removal simple. The rugged design is suitable for use in harsh environment applications, such as in Power, Transportation, Pipeline, Petrochemical, Automation Industries and IP surveillance.

Features:

  • 8* 10/100/1000Base-T(X) ports
  • 2* gigabit SFP ports
  • Unmanaged industrial switch
  • Supporting IEEE802.3af&at
  • 9 ~ 36VDC Power supply input
  • Overload current protection and reverse polarity protection
  • Level 3 ESD protection
  • IP-40 housing design
  • Supporting DIN-rail or wall mounted
  • Unique DIN mount design makes mount and remove easy

The post Industrial switch, ESUGS8-P2-L-B appeared first on Bunker Seguridad Electrónica S.L..

]]>