Ground mounting. For wall-mounting the accessory PTWB is required.

Features:

Each reference includes a central body in aluminium, two polycarbonate profiles, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), thermostat and the motherboard that manages all the system.

Everything is prewired and mounted together with the IR beams (*) – chosen by the customer – and their mounting back plates.

(*) Compatible with different models of photobeams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photobeams.

Besides, it includes 70cm side brackets (MB3SB).

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as the other usual Bunker’s beam towers’ accessories (anti-climb top tamper, concrete floor bracket, etc.). For more information see “Accessories” paragraph.

Most common models for 3m height:

• D304RR – 3m, 360° tower ready for 4 Rx on each side.
• D304TT – 3m, 360° tower ready for 4 Tx on each side.
• D304TR – 3m, 360° tower ready for 2 Tx on one side and 2 Rx on the other side.
• D306RR – 3m, 360° tower ready for 6 Rx on each side.
• D306TT – 3m, 360° tower ready for 6Tx on each side.
• D306TR – 3m, 360° tower ready for 2 Tx on one side and 3 Rx on the other side.
• D308RR – 3m, 360° tower ready for 8 Rx on each side.
• D308TT – 3m, 360° tower ready for 8 Tx on each side.
• D308TR – 3m, 360° tower ready for 4 Tx on one side and 4 Rx on the other side.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 360°, 3m, ground installation appeared first on Bunker Seguridad Electrónica S.L..

MALTA is an infrared lamp tower mainly used in residential areas, a lamppost garden style tower. Up to three infrared photo beams (with two beams; 3Tx + 3Rx or a desired photoelectric sensor combination) can be fixed inside the infrared tower. MALTA Garden Guard perimeter lamp tower has a discreet design which perfectly fits into any residential area without losing its aesthetic value, while at the same time it provides perimeter security, elegance and light to the area. The sensors are completely hidden inside the pole which ensures intruder detection given that it would not be aware of the existence of a perimeter security system.

The entire Garden Guard infrared perimeter tower range is perfectly coordinated both aesthetically and functionally, that is to say, MALTA security tower can be used with MALTA or CAV infrared towers and even with the industrial range if required so (PT, MB and MB-W infrared towers).

Features:
MALTA is an infrared tower, belonging to the Garden Guard family, destined to be fixed onto the ground (see CAVW model for wall installation).

MALTA Garden Guard infrared tower for photoelectric sensors with two beams – dimensions:

• IR tower’s external pole: 10 cm (3.94”).
• Height (IR beam’s lamp included): 185 cm (6′ 1″).
• IR tower’s base diameter: 27 cm (10.63″).
• Translucent white PC globe: 35 cm (13.78″)..

Material composing MALTA Garden Guard photoelectric tower:

• Aluminum profile which acts as the central part of the MALTA infrared tower.
• Black polycarbonate tube with UV treatment. It has two main functions: on one hand, it covers the structure by hiding at the same time photoelectric sensors’ localization, orientation and height and on the other hand, it protects these sensors from vandal acts.
• Reinforced ABS base fixing support where the security tower’s aluminium profile and polycarbonate profile are fixed.
• CAV upper body (grille type) made of black polycarbonate.
• Ceramic socket for E27 bulb fixing on the top of the infrared garden lamp.

The post MALTA – Perimeter lamp tower (180°) for infrared photobeams appeared first on Bunker Seguridad Electrónica S.L..

Given that Bunker manufactures a wide range of perimeter products, such as Garden Guard (MALTA, CAV and CAV-W), for solely residential areas, we refer to the PT infrared tower with the adjective “industrial”, even though in real situations MB IR towers (180º) and PT security towers are installed very often in residential areas and they integrate perfectly their stylish design in the environment, also when using PT-LUX and PT-CCTV accessories (the first one transforms the perimeter security tower into a lamp as low consumption bulbs can be fixed to it. As for PT-CCTV, it allows to integrate inside the infrared tower (AIR) up to two CCTV cameras, which makes the solution very compact and clean. Please see “Accessories” paragraph for more information.

Features:

• Two black polycarbonate profiles which allow the infrared rays, emitted by the photoelectric beam, to go through.
• A black anodized aluminium profile which forms part of the IR tower structure.
• An anti-sabotage tamper to be fixed on the upper side of the IR tower and to consequently avoid a possible manipulation of the perimeter security system by putting out of order a photoelectric sensor or even by cancelling an infrared photo beam.
• Installation kit: it is composed of stainless screws, used to fix an infrared tower to the floor, to fix infrared photo beams to the main part of the security tower, etc.

In addition, 3m high infrared tower model (PT300), manufactured by Bunker Seguridad, is equipped with 70 cm MB3SB side brackets. These give more stability to the infrared photo beams set inside, but also more rigidity to the electric tower which has an effect on the perimeter security system with less unwanted alarms.

The post PT – Double-sided protection perimeter tower (360°) for photoelectric beams appeared first on Bunker Seguridad Electrónica S.L..

Ground mounting. For wall-mounting the accessory PTWB is required.

Features:

Each reference includes a central body in aluminium, two polycarbonate profiles, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), thermostat and the motherboard that manages all the system.

Everything is prewired and mounted together with the IR beams (*) – chosen by the customer – and their mounting back plates.

(*) Compatible with different models of photoelectric beams (TAKEX, OPTEX, ATSUMI and others). These are not included in the price. easyPack can also be supplied without photoelectric beams.

Additionally, as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as other usual Bunker’s beam towers’ accessories (anti-climb top tamper, 0,70m steel side brackets, concrete floor bracket, etc.). For more information see “Accessories” section.

Most common models for 2m height:

• D204RR – 2m, 360° tower ready for 2 Rx on each side.
• D204TT – 2m, 360° tower ready for 2 Tx on each side.
• D204TR – 2m, 360° tower ready for 2 Tx on one side and 2 Rx on the other side.
• D206RR – 2m, 360° tower ready for 3 Rx on each side.
• D206TT – 2m, 360° tower ready for 3 Tx on each side.
• D206TR – 2m, 360° tower ready for 3 Tx on one side and 3 Rx on the other side.

(Tx = transmitter/s; Rx= receiver/s)

For other configurations, please consult us.

The post easyPack prewired beam towers – 360°, 2m, ground installation appeared first on Bunker Seguridad Electrónica S.L..