In order to avoid assaults, a good perimeter security system is required: infrared barriers and infrared detectors are one of the best options for intrusion detection. These detection systems are constantly studied in order to avoid false alarms: composed by transmitters and receivers, each transmitter is read by all the detectors. When one of these infrared rays is interrupted, the activation of the alarm would be delayed, while if the interruption occurs in 2 or more rays, the alarm would be activated.

From Bunker Seguridad Electronica, we want to indicate the key points when choosing a good protection system for scaffolding or tubular structures:

Weather factors

The perimeter sensors must work 24 hours a day and in any weather condition: in case of thick fog, hailstorms or smoke the cameras lose their effectiveness while the infrared sensors continue working. This is one of the myths when it comes to perimeter security. The idea that cameras provide total security is far from the reality. They are, in fact, backup devices.

In this regard, Takex infrared sensors offer unmatched extra protection against frost, dew and snow, as they are protected with a hood-shaped cover that does not allow water to seep through its grooves, extending the life of the device. Their optics are also hermetically sealed, so that insects cannot penetrate the system.

Light resistance

For outdoor installations, a problem that affects the sensors is light, both natural and artificial: water mirror effect, cars lights, or the attempt to dazzle the sensor by means of a flashlight are not an inconvenient for Takex barriers and detectors, as their tolerance is up to 50 000 lx. In addition, sabotage attempts through blinding are canceled thanks to its special light filtering circuit.

Technology

The choice between the different models must depend on the type of structure, space and place where they are going to be installed:

Takex MS-100E passive detector is one of the favorites in Spain and the United Kingdom. It has a 180º rotating lens that allows the unit to be placed in almost any position: for the protection of scaffolding and tubular structures, it is installed on the ladder section and at the ends of the scaffolding focused on the wall to protect from breaking-in. This Takex sensor has a front cover that hides the orientation of the sensor.

For 4-beam technology, Takex has the PB-50F model, recommended as long as there is no possibility of overlapping of beams.

The PB-30TK and PB-60TK models have 2 beams and the difference between them is in the distance to be covered.

Installation, assembly and handling

Due to the fact scaffolding is a structure that won’t remain in the same place for a long time, intruder detection systems must be easy-to-install and resistant in order to support all types of handling and assembly. Takex quality finishing extends the life of their products: these sensors stand out for their robustness. Its useful life is estimated at 10 years for the transmitter and at 9 for the receiver.

Installation assistance

It is convenient that the personnel in charge of the installation and assembly of these devices have knowledge and training on them, therefore, from Bunker Seguridad Electronica, we offer personalized training on all the products we have, understanding that a deep knowledge about the product allows the installer an easy and simple use of it, to avoid, in this way, giving more assistance to the installation with respect to the desired ones.

Economic factor

The economic factor plays a decisive role in choosing the technology that will protect the structure. However, other factors such as those mentioned above should not be overlooked: device life, manufacturer warranty, technical advances, performance or technical support.

Takex infrared sensors are undoubtedly the most expensive on the market, but they also own the highest quality and durability, which translates into a reduction of false alarms and most importantly: less assistance to the installation, so that the initial investment is widely amortized. These equipments are designed for industrial work and for intensive use, to be manipulated by different people and to be installed again and again in different locations without causing false contacts or deteriorating the product.

All the products mentioned throughout the article, and many more of the Takex brand, can be obtained through Bunker Seguridad Electronica.

The post Protection of scaffolding and tubular construction solutions: key points appeared first on Bunker Seguridad Electrónica S.L..

Takex progetta e produce barriere a infrarossi a 2 e 4 raggi ed è il riferimento in qualsiasi allarme per ponteggi grazie alla sua robustezza, resistenza alla luce, vita utile e tecnologia. Queste possono essere installate, smontate e manipolate in numerose occasioni, anche da “mani diverse”, nel corso degli anni. Così, la qualità non scende, non ci sono strisce mobili, nessun rallentamento o falsi contatti.

Il modello consigliato di barriera a infrarossi a quattro raggi, sempre che non ci sia la possibilità di sovrapposizione di impalcature, è Takex PB-50F (PB-50FA); per quanto riguarda i modelli a 2 raggi, a seconda della distanza da proteggere, esistono i modelli PB-30TK e PB60TK.

The post Barriere a infrarossi Takex utilizzate per impalcature e strutture tubolari appeared first on Bunker Seguridad Electrónica S.L..

The MS-12 series of Takex also includes details such as pulse counter, NO / NC output and sensitivity adjustment. Its structure is rainproof and its installation is possible both indoors and outdoors.

In addition, Takex has included in the 12TE model a head with double sensor that offers un- limited tolerance to pets: the horizontal curtain is fixed and parallel to the ground, while the descending curtain is adjustable to adjust the distance from 3 to 12 meters. The detection angle is 90o and it is adjustable, so the maximum coverage is 12mx 90o.

In addition to the characteristics of the previous model, the 12FE detector offers quadruple sensor, which is composed of two heads with dual sensors for each head, and which in- crease the coverage up to 180o.

Thanks to these characteristics, the infrared detectors, and especially the MS-12 series from Takex, are one of the most highly rated on the market, specially designed for indus- trial applications and in residential environments.

The post Detectors the MS-12TE and 12-FE IR from Takex are sold in Spain appeared first on Bunker Seguridad Electrónica S.L..

TAKEX is an important Japanese manufacturer of perimeter security detectors, focused mainly on outdoor active infrared photo beams and outdoor PIR for perimeter protection for intrusion detection, CCTV activation or other security applications.

Bunker Seguridad’s stand at SICUR International Security, Safety and Fire Exhibition, which will take place from 23 to 26 February 2016, will exhibit the latest novelties on TAKEX perimeter protection products. One of the featured perimeter products – on which TAKEX leadership in the market is based – is its FH-KH series of infrared beam detectors. Some of its most important features are: 4 beams with double modulation high-power synchronized, 4 selectable frequency channels with beam modulation, double protection layer for electronic modules in harsh environments (saline-corrosive ones) and a weather conditions’ monitoring circuit for proper beam propagation.

Their infrared photo beams can be perfectly combined with perimeter towers manufactured by BUNKER SEGURIDAD, another important company inside the anti-intrusion protection sector. Both together represent an essential tandem which guarantees maximum reliability and quality of the products.

SICUR will take place from 23 to 26 February 2016 at Feria de Madrid (IFEMA).

Read more information on SICUR on their official website.

The post BUNKER SEGURIDAD exhibits at SICUR 2016 the latest novelties concerning TAKEX infrared detectors for perimeter protection appeared first on Bunker Seguridad Electrónica S.L..

The TAKEX stand at ASIS 2015 fair, held this year in California, presented novelties which TAKEX offers concerning its perimeter detection products. One of the products that should be exposed due to the fact that it is one of TAKEX most important products in the market is its FH-KH series of infrared beam sensors. Its most important features are four high-power beams with double modulation, four selectable frequency channels with beam modulation, double protection layer for electronic modules for harsh environments (saline-corrosive ones) and atmosphere conditions’ monitoring circuit for beam propagation.

Its infrared photo beams can also be easily combined with perimeter towers by BUNKER SEGURIDAD, another important manufacturer inside the anti-intrusion protection sector. Both form a tandem which offers maximum reliability and quality.

The post ASIS 2015: novelties concerning TAKEX infrared sensor range for perimeter detection appeared first on Bunker Seguridad Electrónica S.L..